Dimensions
3 m and 6 m container dimensions: floor area and choosing a module
3.00 × 2.45 × 2.80 m and 6.00 × 2.45 × 2.80 m containers: external dimensions, footprint and checks for office or residential use.
Containere Romania6 min
The calculator models measure 3.00 × 2.45 × 2.80 m for the compact module and 6.00 × 2.45 × 2.80 m for the standard module. The order is length × width × height. These external measurements describe the modules on this website, not every container available on the market.
Dimensions and external footprint
| Model | Length | Width | External height | External footprint L × W |
|---|---|---|---|---|
| Compact | 3.00 m | 2.45 m | 2.80 m | 7.35 m² |
| Standard | 6.00 m | 2.45 m | 2.80 m | 14.70 m² |
The compact footprint is 3.00 × 2.45 m = 7.35 m²; the standard footprint is 6.00 × 2.45 m = 14.70 m². This is the external rectangle occupied by a module. It is neither the usable internal floor area nor a construction-ready foundation specification.
Usable floor area and internal height: request a dimensioned plan
Walls, structural profiles, finishes and partitions reduce internal space. An external height of 2.80 m does not establish a clear internal height of 2.50 m: this depends on the floor and roof build-up. Request finished internal dimensions and a dimensioned plan for the configuration you are ordering.
- Finished internal length and width.
- Clear height from finished floor to ceiling.
- Door and window opening dimensions, including door swing.
- Furniture, sanitary fixtures and circulation space.
Insulation thickness is only one consideration for living spaces; read the winter insulation guide.
Choosing between a 3 m and a 6 m container
A 3 m module can be considered for a security point, individual office or auxiliary use if the required layout and equipment fit. A 6 m module offers more length for furniture and partitions. For residential use, test the bed, bathroom, cooking area and circulation on a real plan rather than choosing by floor area alone.
For a workspace, compare the available office containers.
Combining modules involves more than adding floor areas
Two standard modules have a combined nominal external footprint of 29.40 m² before changes to the configuration. The usable area and home layout depend on their arrangement, retained walls, joints and partitions. Openings between modules must be designed; do not assume walls can be cut without structural verification.
For a project with connected modules, explore turnkey modular homes.
Module dimensions do not determine truck access on their own
A module width of 2.45 m is not enough to establish that transport needs no special approvals. The carrier must check the complete loaded vehicle's dimensions, its height on the platform, weight and route restrictions. Gates, bends, overhead cables and lifting space need checking before delivery.
For site checks, continue with site preparation, foundations and delivery access.
Connect the size decision to your budget and permits
A compact module starts at a lower price, but weigh the saving against the space needed and fit-out requirements. Neither small dimensions nor the ability to relocate a module replaces checking the planning rules for your plot.
Bring the costs together with the container home price and budget guide.
For Romanian siting documents, read the building permit guide.
Once the intended use and furniture layout are clear, compare size and insulation in the Container Calculator.